Titanium sheets/plates
| 品名称 Spec. | 规格 Size (单位: mm) | 主要标准 Standards |
| Sheet/plate | ||
| Foil strip in coil | (0.01-0.02)×(30-100)×≥500 | |
| Srip in coil |
Titanium claded sheets/plates
| 品名称 Spec. | 规格 Size (单位: mm) | 主要标准 Standards | ||
| plates | two floor clad base Ti three floor clad base Ti | |||
Technical Data Sheet
| Chemical Composition Limits | ||||||||||
| Weight % | Al | Sn | Zr | Mo | Fe | C | N | H | O | Others (total) |
| Titanium 6Al-2Sn-4Zr-2Mo | 5.5-6.5 | 1.8-2.2 | 3.6-4.4 | 1.8-2.2 | 0.25 | 0.05 | 0.04 | 0.015 | 0.15 | 0.30 |
Titanium 6-2-4-2 (6Al-2Sn-4Zr-2Mo) is an alpha-beta titanium alloy capable of being heat treated to higher strengths in greater section sizes that 6Al-4V. Widely used in forged components, 6-2-4-2 beta forged material has enhanced strength, ductility and a combination of good low-cycle fatigue and fatigue-crack growth resitance. This alloy is used in the intermediate compressor stages of turbine engines for disks and blades, seals and for airframe parts.
Typical Mechanical Properties
| Material | Thickness | Tensile Strength min | Yield Strength min | Elongation in 4D (%) | ||
| ksi | Mpa | ksi | Mpa | |||
| Titanium 6Al-2Sn-4Zr-2Mo Sheet (duplex annealed) Room temp | 0.025"-0.062" | 135 | 931 | 125 | 862 | 8 |
| Titanium 6Al-2Sn-4Zr-2Mo Sheet (duplex annealed) Room temp | 0.062"-1.0" | 135 | 931 | 125 | 862 | 10 |
| Titanium 6Al-2Sn-4Zr-2Mo Sheet (duplex annealed) Room temp | 1.0"-3.0" | 130 | 896 | 120 | 827 | 10 |
Availability
Titanium6Al-2Sn-4Zr-2Mois available in sheet, strip, plate, bar and forgings. For all stock and size availability of Titanium6Al-2Sn-4Zr-2MocontactSales.
Specifications
AMS 4919 sheet, strip, plate (duplex annealed)
AMS 4975 bars, wire, rings (solution and precipitation heat treated)
AMS 4981 bars, wire, forgings (solution and precipitation heat treated)
AMS 6905 bars, wire, forgings (duplex annealed
AMS-T-9046 AB4 sheet, strip, plate
AMS-T-90476Al-2Sn-4Zr-2Mobar
MIL-T-9046J AB-4 sheet, strip, plate
MIL-T-9047 6Al-2Sn-4Zr-2Mo bar
MIL-T-9046H Type III Comp G sheet, strip, plate
TA18 (w/drawn)
TA19 (w/drawn)
TA20 (w/drawn)
TA25 (w/drawn)
TA26 (w/drawn)
TA27 (w/drawn)



