TEL：029-89699396
FAX：029-89699396
WEB：http://www.xacti.com.cn
ADD：No.19, Zhuque street Xi’an Shaanxi
Stainless Steel 416 (AMS 5610)
Technical Data Sheet
Type 416 is a high chromium martensitic free-machining stainless steel. Type 416 can be hardened by heat treatment to higher strength and hardness level. Type 416 is used for any part that requires considerable machining, golf club heads, axles, gears and pinions, lead screws, valve trim. Type 416 is not recommended for vessels containing gases or liquids under high pressure.
| Chemical Composition Limits | ||||||||
| Weight% | C | P | Si | Mn | S | Cr | Fe | Se |
| Alloy 416 Type 1 | 0.15 max | 0.060 max | 1 max | 1.25 max | 0.40 max | 11.50-13.50 | bal | 0.18-0.35 |
| Alloy 416 Type 2 | 0.15 max | 0.060 max | 1 max | 2.50 max | 0.40 max | 11.50-13.50 | bal | - |
Typical Mechanical Properties
| Material | Tempering Temp °F (°C) | 0.2 % Yield Strength (Mpa) | Tensile Strength (Mpa) | % Elongation in 2" | % Reduction of Area | Hardness Brinell |
| Alloy 416 1" round bar, hardened 1800 °F (982°C) oil quench, tempered one hour | 300 (149) | 1034 | 1344 | 10 | 40 | 390 |
| Alloy 416 1" round bar, hardened 1800 °F (982°C) oil quench, tempered one hour | 500 (260) | 979 | 1276 | 13 | 45 | 375 |
| Alloy 416 1" round bar, hardened 1800 °F (982°C) oil quench, tempered one hour | 700 (371) | 1007 | 1310 | 13 | 48 | 390 |
| Alloy 416 1" round bar, hardened 1800 °F (982°C) oil quench, tempered one hour | 900 (482) | 896 | 1158 | 14 | 50 | 341 |
| Alloy 416 1" round bar, hardened 1800 °F (982°C) oil quench, tempered one hour | 1000 (538) | 793 | 1000 | 15 | 50 | 300 |
| Alloy 416 1" round bar, hardened 1800 °F (982°C) oil quench, tempered one hours | 1100 (593) | 689 | 862 | 17 | 53 | 262 |
| Alloy 416 1" round bar, hardened 1800 °F (982°C) oil quench, tempered one hours | 1200 (650) | 586 | 758 | 18 | 55 | 225 |
Availability
Alloy 416 is available in Bar (Hexagon, Round, Square, Flat), Billet, Wire, Rod. For all stock availability contact Sales.
Specifications
UNS S41600
Type 416 Ann Bar (Flat, Hex, Round, Square)
AMS 5610 T-2 Bar (free machining)
ASTM A 484 / ASME SA484
ASTM A 582 /ASME SA582
MIL W 52263
QQ S 763C
QQ S 764
AISI 416
Type 416 HT Bar (Round, Hex)
ASTM A 484 / ASME SA484
ASTM A 582 Cond T /ASME SA582
EMS 537
MIL W 52263
QQ S 763C Cond H
QQ S 764 Cond T
BS 970; 416S29 / 416S37 / 416S41
BS 970; 416S21
EN56AM/ EN56BM / EN56CM
WS 1.4005
AFNOR Z12CF13
